Dinion IP Camera NBC en Installation and Operation Manual Dinion IP Camera Table of Contents | en 3 Table of Contents 1 Safety 8 Safety precautions. CCTV | NBC Dinion IP Cameras. Dinion IP cameras With a 1/3 inch color CCD and Bosch·s advanced digital Bosch·s innovative tri streaming feature. Bosch NBCP VGA Ready to Use C/CS Mount Box shape Network CameraVAC or 12 VDC or PoE, Manufacturer: Bosch, Category: IP & Megapixel.
|Published (Last):||5 August 2007|
|PDF File Size:||11.33 Mb|
|ePub File Size:||7.85 Mb|
|Price:||Free* [*Free Regsitration Required]|
See any errors on this page?
Bosch NBC-455-11P IP Camera With Built-in Video Motion Detection
To ensure that the correct MAC address is displayed, wait 20 seconds after power-up before opening bsch Install menu. See any errors on this page? Select the required storage medium from the list. Its main job is decoding video, audio, and control data from a remote transmitter. The basic sensitivity of the motion detector can be adjusted for the environmental conditions to which the camera is subject.
Changes in any other windows are ignored. Daylight saving time The internal clock can switch automatically between normal and daylight saving time DST.
Bosch NBC Dinion IP Camera (60 Hz) FU B&H Photo
The current alarm status is displayed for information purposes. For each profile, click Set to save. Select a profile by clicking the appropriate tab. Never open the casing of the unit. Posting interval Enter the interval in seconds at which the images are sent to an FTP server. The same file name is always used and any existing file will be overwritten by the current file. For the detector to function, the nbc-455-1p1 conditions must be met: For further assistance, contact your PC system administrator.
Use the saved configuration to restore the original settings at any time. Type ping followed by the IP address of the device. Show VCA trajectories The trajectories motion lines of objects from the video content analysis are displayed in the live video image if a corresponding analysis type is activated. The selection is removed from the table and the window is closed.
It is a number that acts like a name for a particular network adapter. The units only need to be part of the same closed network. A window opens to select the target profiles for the copied settings. Run a series of tests at different times of the day and night to ensure that the video sensor is operating as intended.
Bosch NBC-455-11P IP camera with built-in video motion detection
However, there is no guarantee that interference will not occur in a particular installation. Flash ROM, remote programmable. Global change Activate this function if the global change, as set with the Global change bsch control, should trigger an alarm.
The camera uses H. The factory default IP address is Enter one command at a time. Select Time server if the server uses the RFC protocol.
Keep this information at hand when seeking technical support. Set up normal audio transmission before configuring the audio alarm.
Bosch NBC IP Color Camera FU B&H Photo Video
The latest firmware can be obtained from your customer service center or from the Bosch Security Systems download area. User supplied wiring must be in compliance with electrical codes Class 2 power levels.
The items in the Install menu include the Mode selection, the Lens Wizard submenu, the Network submenu, and the Defaults submenu.
An activated stream is marked with a check. Playback is automatically stopped paused during scrolling. The algorithm properties have the following settings: For example, if a live password is assigned, a service and a user password should also be set. Incorrect polarity does not damage the camera but it will not switch on.
Recording boech corresponds to Stream 1, Recording 2 corresponds to Stream 2. This is either done by duplicating the data stream in the device and then distributing it to multiple receivers multi-unicastor by distributing an individual data stream in the network itself to multiple receivers in a defined group multicast.
File for event log Enter the path for saving the event log here. The configuration menu tree allows all parameters of the unit to be configured. Connect to the camera again using this address. Auto DC Type iris. Choose other values from the list boxes under the table, to change the selected entry. Pre-programmed profiles are available that give priority to different parameters. The new profile name is saved. Activate recording After completing configuration, activate the recording schedule and start recording.
Device time zone Select the time zone in which the system is located. Other submenus and functions can be accessed using the on-screen commands. Tamper detection Detect tampering of cameras and video cables by means of various options. Remove the lens connector and check the pin connections. This protocol provides high accuracy and is required for special applications and future function boscch.